Fluorite
Acid, ceramic and metallurgical grade fluorspar
Fluorspar concentrate from our own Kouh Ziarat mine, upgraded on an 18,000 t/yr dense media separation line at the Ferdows Industrial Complex in South Khorasan.

From our own mine to high-purity fluorspar
AMMICO runs a Dense Media Separation (DMS) line with an annual capacity of 18,000 tons in Shahid Parsa Industrial Park, Ferdows, South Khorasan. The ore comes from the Kouh Ziarat mine, operated by AMMICO, with a grade of 20–60% CaF₂ depending on the zone, and is processed according to the grade required.
After primary crushing, the correctly sized ore enters the heavy media separation system, which uses ferrosilicon to upgrade the fluorspar. The same line can also process other minerals to raise their purity.

Processing line
Every lot follows the same four-stage route, from the mine face to the grade you order.
Mining
Ore is extracted at the Kouh Ziarat mine with a grade of 20–60% CaF₂, depending on the zone.
Crushing & sizing
Primary crushing brings the ore to the particle size needed for separation.
Dense media separation
A heavy-media circuit using ferrosilicon separates fluorite from gangue and raises the CaF₂ content.
Grading & supply
The concentrate is classified into acid, ceramic and metallurgical grades and supplied as gravel or powder.
Grades & chemical specifications
Typical chemical composition of each grade (%). Gravel is supplied in 4–10 mm and 10–25 mm; powder is supplied at 200 mesh.
| Type | CaF2 % | SiO2 % | P2O5 % | MgO % | CaO % | SO3 % | LOI |
|---|---|---|---|---|---|---|---|
| Type A | >97 | <0.5 | <0.02 | <0.5 | <0.5 | <0.5 | <0.4 |
| Type B | 95–97 | <1 | <0.02 | <0.7 | <1 | <0.5 | <2 |
| Type C | 90–95 | <1 | <0.02 | <1 | <1.5 | <0.5 | <3 |
| Type | CaF2 % | SiO2 % | P2O5 % | MgO % | CaO % | SO3 % | LOI |
|---|---|---|---|---|---|---|---|
| Type A | 85–90 | <3 | <0.02 | <2 | <2 | <0.5 | <5 |
| Type B | 80–85 | <3 | <0.02 | <3 | <4 | <0.5 | <8 |
| Type | CaF2 % | SiO2 % | P2O5 % | MgO % | CaO % | SO3 % | LOI |
|---|---|---|---|---|---|---|---|
| Type A | 75–80 | <5 | <0.02 | <5 | <6 | <0.5 | <9 |
| Type B | 70–75 | <5 | <0.02 | <6 | <7 | <0.5 | <11 |
| Type C | 65–70 | <5 | <0.02 | <7 | <8 | <0.5 | <13 |
Fluorite (fluorspar) is calcium fluoride, CaF₂.
Gravel
- 10–25 mm
- 4–10 mm
Powder
- 200 mesh
Where our fluorspar is used
Fluorspar is a critical raw material for the steel, aluminium and chemical industries worldwide. Electrode, aluminium and steel production use more than 95% of the world’s supply.
Steelmaking
Used as a flux: it lowers slag viscosity and helps phosphorus and sulfur move into the slag.
Aluminium
A raw material for aluminium fluoride and cryolite used in aluminium smelting.
Chemicals
The base of hydrofluoric acid (HF) and the wider fluorochemicals industry.
Ceramics & glass
Used in ceramic glazes, enamels and glass as a flux and opacifier.
Welding electrodes
An ingredient of welding electrode coatings and fluxes.
Electronics
Fluorine chemicals made from fluorspar are used across the electronics industry.
Turning other mines’ waste into product
One of our main goals is to process waste from other fluorspar mines in Iran. It conserves resources and reduces extraction and waste removal, which helps protect the environment.
Inside the plant
Request a fluorite quotation
Tell us the grade, size, quantity and destination. Our sales team will reply with specifications and a quotation.




